who does modified cams?

Renault & Alpine General Discussion

Moderators: eastlmark, phildini, BIG_MVS, Alpineandy, Test Moderator

no avatar
User

boy from oz

Rank

Non Member

Posts

3

Joined

Fri May 04, 2018 8:26 am


Has thanked: 0 time
Been thanked: 0 time

who does modified cams?

Postby boy from oz » Fri May 04, 2018 8:44 am

hi guys ive just found your forum, im in Australia, and wondering if anybody can point in the direction of where i can get cams for a 3 liter v6, ive been reading some older threads on here, and im looking at going the way of the 3lt conversion as i have a few old laguna B56R engines sitting about,
(that im going to put 11.1 pistons in) i already have throttle bodies (that i will have to make a new manifold for the 3 liter) and aftermarket injection on the alpine,
im wanting to build something that puts out around the 270 to 300 hp
have any on here achieved this?
im also going to need larger piped extractors, does anybody know where these can be brought ??

regard paul.
User avatar
User

simontaylor

Rank

Club Member

Club Member
Posts

5394

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 28 times
Been thanked: 44 times

Re: who does modified cams?

Postby simontaylor » Fri May 04, 2018 12:22 pm

2.5L with BW EFR 6258 turbo, 440cc injectors, PWR 10 inch Charge Cooler, and Adaptronic ECU and A610 clutch.
Std block, heads, cams, manifolds and a straight through exhaust.
Running 280bhp and 300 ftLbs.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
no avatar
User

MFaulks

Rank

Club Member

Club Member
Posts

1577

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 44 times
Been thanked: 24 times

Re: who does modified cams?

Postby MFaulks » Fri May 04, 2018 8:22 pm

.
Hi Paul,

Drop me a pm, and I will put you in touch with a guy in Australia who took my data for a n/a cam profile that I had cut, will do what you need, he thn got it cut locally (Auz) and is running it now (has dyno data). You can then make contact, compare notes, and I'm sure he can get some more ground for you.

Regards
Martin
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
no avatar
User

boy from oz

Rank

Non Member

Posts

3

Joined

Fri May 04, 2018 8:26 am


Has thanked: 0 time
Been thanked: 0 time

Re: who does modified cams?

Postby boy from oz » Sat May 05, 2018 12:29 am

thanks guys, i want this to stay non turbo, as i want it to look as original as possible.. well closeish.. :)
User avatar
User

Tony Smith

Rank

Non Member

Posts

1394

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Re: who does modified cams?

Postby Tony Smith » Sat May 05, 2018 12:58 pm

simontaylor wrote:2.5L with BW EFR 6258 turbo, 440cc injectors, PWR 10 inch Charge Cooler, and Adaptronic ECU and A610 clutch.
Std block, heads, cams, manifolds and a straight through exhaust.
Running 280bhp and 300 ftLbs.


11:1 Compression so don't think it will turbo :0).

I don't know of anybody who has tuned an aspirated GTA virtually at all in this country. I know MoFo did quite a high power build for a kit car but I think this was around 230 bhp if I remember rightly. A few 310s around in France running powerful atmo builds but I think 100 bhp litre from this engine might be a push at any budget, the engine just isn't that efficient.
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.


  • Advertisement

Who is online

Users browsing this forum: Google [Bot] and 7 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France
cron