Early GTA Radio for Sale

[BIG_MVS]

Early Radio cassette. Top and bottom with wiring loom. Untested so a bit of a gamble.



£100 including postage.

[BIG_MVS]

SOLD

[rupert]

If you find another let me know pls! ; )

[BIG_MVS]

Will do! You need to be quicker...

Hang on what you really want/need is an ABS upgrade for your Le Mans

[rupert]

I have ABS, just all the teeth on the hubs are rusted away.... !

[alpine744]

I have ABS, just all the teeth on the hubs are rusted away.... !

Same on mine! At least they are still good enough for the system to work. Have you ever looked into sourcing replacements? I guess that the rear ones should be quite straight forward but the front ones are part of the stub axles, of course. Anyone on here managed to have them remade?

[simontaylor]

I have put these on the rear driveshafts, with a view to connecting to after market ECU and enabling Launch-Control or just to use as a road speed sensor. They slipped onto the driveshaft pretty easy and i used araldite to keep them there, afterall they are not under a big load.

Adding belated link.
https://www.ebay.co.uk/itm/AUDI-100-64MM-COG-STYLE-ABS-RING-DRIVESHAFT-RELUCTOR-ABS-RING-1988-1994/131138834008?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

Hi Rupert,

I have a complete spare original head unit for the GTA - let me know if you are interested.

Matthew.

[BIG_MVS]

I have ABS, just all the teeth on the hubs are rusted away.... !

but the front ones are part of the stub axles, of course. Anyone on here managed to have them remade?

Nope not part of the stub axle...

You going blind Longdrop ?

[alpine744]

I have ABS, just all the teeth on the hubs are rusted away.... !

but the front ones are part of the stub axles, of course. Anyone on here managed to have them remade?

Nope not part of the stub axle...

Err yes, actually. The picture that you've put on is of the front stub axles......

Lee, you're probably the most likely man on here to have had to do something about replacing the front rings. Any ideas?

I've got lots of ideas.It wouldn't be that difficult to make new ones or 'rebuild' the old.Just needs new target wheel making and welding up to old axle.

[simontaylor]

I have put these on the rear driveshafts, with a view to connecting to after market ECU and enabling Launch-Control or just to use as a road speed sensor. They slipped onto the driveshaft pretty easy and i used araldite to keep them there, afterall they are not under a big load.

Adding belated link.
https://www.ebay.co.uk/itm/AUDI-100-64MM-COG-STYLE-ABS-RING-DRIVESHAFT-RELUCTOR-ABS-RING-1988-1994/131138834008?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

Or alaldite if you dont have a welder to hand.

[BIG_MVS]

Sorry my bad what I meant to say is that they are not part of the hub assembly so can be removed as part of the stub axle.

The two I have are lovely by the way.

[alpine744]

OK, thanks for your ideas gentlemen.